Stainless steel gas spring as a stainless steel material, whether in the service life, or quality, are certain advantages, so now the use of stainless steel gas spring in many places, so for stainless steel gas spring in the installation of you know where to install, and what are the precautions, please listen to us to tell you.
1. Gas spring piston rod must be installed in the down position, not upside down, so as to reduce friction and ensure the best damping quality and cushioning performance.
2. Deciding where to install the pivot point is a guarantee that the gas spring will work correctly, and the gas spring must be installed in the correct way, i.e., when it is closed, let it move past the center line of the structure, otherwise, the gas spring will often automatically reset.
Having said that, the installation position of the stainless steel gas spring is selected, so the next step is to talk about the installation of the stainless steel gas spring, and the following are the relevant installation considerations.
1. If you need to adjust the direction of the joint, you should roll the cylinder or piston rod clockwise.
2. choose the size to be fair, the size of the force should be appropriate, generally the piston rod should be left with about 10 mm of residual travel when the barn door is closed.
3. Use the ambient temperature: -30℃-+80℃.
4. Gas spring is a high-pressure product, it is strictly forbidden to dissect, fire bake, smash and touch at will.
5. Gas spring should not be subject to tilt force or lateral force in the work, and should not be used as a handrail.
6. The piston rod of gas spring should be installed downward as much as possible to ensure the best damping effect and buffer function.
7. The connection line of the two mounting points should be as vertical as possible to the center line of the rotation of the gas spring, otherwise the normal expansion and contraction of the gas spring will be affected, and the phenomenon of jamming and noise will occur.
8. To ensure the reliability of the seal, the surface of the piston rod must not be damaged, and it is strictly forbidden to apply paint and chemicals to the piston rod, nor should the gas spring be pre-installed in the desired position and then processed, such as welding, grinding, or painting, which will affect the service life of the gas spring.
9. The exact pivot point installation position is the guarantee of the gas spring working properly, that is, when the barn door is closed, let the gas spring produce a parting force to the barn, otherwise the gas spring will often push the door open automatically.
Stainless steel gas springs are still very beneficial from the practical application, so we have to choose a good installation position, as well as pay attention to some operational considerations in the process of installation.
Post time: Sep-30-2021